Tinmo F688 flash File LMY47I (100% Tested) Without Password


Tinmo F688 flash File LMY47I (100% Tested) Without Password

Tinmo F688 Flash File Tested:

This Firmware working on Tinmo F688 dead condition phone. Fix Your problem turn on the issue and stuck boot or others any problem on your phone fix easy to this working firmware 100% Tested this firmware. Tinmo F688 Mobile device chipset type of this phone is Media Tek MT6580 and this phone has 1GB of RAM and this phone was once a very good phone inside a very low-cost phone.

OK, that's the main problem is Many People face the problem of Dead your phone after flashing, so this problem will be fixed with this file. This Firmware Flash File (Stock Official Rom) also helps you to repair the Mobile device Very easy and This is a file we tested 100% ok. 

We test all our Tinmo F688 Flash files first and then upload them. You can use our files in a very secure way.  If your phone is in a dead Condition or if the phone is dead due to a software problem then if you flash with this file then hopefully your phone is bound to be 100% fixed.  If the phone is not stuck then the display turns white when it is turned on, or the phone works automatically, something is automatically downloaded to the phone, the phone becomes very slow.  For this, you need to flash the phone with this file and if you can do everything right, inshaAllah all the problems will be fixed.

What is a flash file?

Flash files are very small. For example, a typical firmware upgrade file maybe 1 or 2 megabytes in size. This is much smaller than the 400-1,000 megabytes required to store the actual software, which is stored separately on your phone's internal storage drive. A flash file is a type of software program that acts as an executable for another kind of file, usually to replace the original program.

Why do we flash our phones?

We flash our phones for various reasons, the most common being to install a new version of the OS. But also, if you have a broken screen or water damage, or even just want to try out a new ROM.

Note: Tinmo F688 With this file you can fix your phone. If your phone is turned on and off again alone, then if you try to flash the phone with the files of this site, your phone will be Fix. There are flash versions of all versions, try what you need. Come on inshaAllah if your phone has anything related to software then everything will be fixed. I gave this file for free without a Password and I will try. Thank you for giving me something good all the time.  

Tinmo F688  firmware fixes This issue :

  • Dead Boot issue.
  • Dead Recovery issue.  
  • Auto Fastboot issue.
  • Auto Recovery issue.
  • Hang on logo issue. 
  • File missing issue.
  • Auto Restart issue. 
  • Software Related issue. 
  • LCD/Display Blank White after other file Flashing issue. 
  • Unfortunately Android Has a Stopped Virus problems issue. 
  • Invalid IMEI Baseband Unknown issue. 
  • And all of the Other software Related issues. 

Tinmo F688 Hardware specification :

  • Internal - 8 GB
  • RAM - 1 GB
  • OS - Android 6.0
  • CPU - 1300.0 MHz (4-core)
  • Chipset Type - MT6580
  • Display Type - TFT Color 
  • Battery capacity - Li-Ion 2200 mAh

Tinmo F688  Flash File information Download :

  • Firmware Version - ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
  • Chipset Type - MT6580
  • Firmware Size - 400 MB +
  • Android Version - Android 6.0
  • File Type - RAR
  • Password - Free
  • Download Link - Google Drive 
Download Tinmo F688MTK Flash File: Download

How to Flash Tinmo F688 MTK CPU follow This Step:

If you have a Tinmo F688 or any other MTK (Media Tek) Android device, and you want to install a new ROM on it, then you're in luck. In this guide, we teach you the steps required to flash a stock ROM to your Tinmo F688 phone. undefined

First of all Download MTK USB Driver on Your computer and then install MTK USB Driver on your computers (if in case of MTK Driver are already installed on your computers then skip this step )

1. Download SPFlash Tool and Unpack/extract SPFlash Tools and Click on SPFlash_tool.exe

2. Select "scatter-Loading" and search MT (your CPU model) _Android_scatter.txt in Your Firmware Folder 

3. Wait for the file to be added into Flash Tool
Select "Download Only" or if upgrade "Firmware upgrade" Press the “Download” button to start

4. Turn off your phone, remove the battery (if the battery is removable), and replace it after some seconds (and don't turn on the phone). Connect your phone to the computer via USB data cable.

5. The process will start and a red progress bar will appear after colors purple, yellow.   and green circles display

You can now safely disconnect your phone and turn it on.

Note: Please make a backup of your device before Flashing or updating Your Firmware 

Next Post »